Documentation › The window, mouse and keys
The window, mouse and keys
Where things are, and how to move the model about.
The parts of the window
| Where | What it is for |
|---|---|
| Command bar, across the top | Three tabs. Study: open and save, material, joints, fixtures, loads, accuracy and Solve. Results: what is plotted, deformation, animation, probes, the summary table and the report. View: standard views, edges, perspective, theme and mouse controls. |
| Study tree, on the left | Everything the study is made of: Parts, Connections, Fixtures, External loads, Solution and Results. Double-click an entry to edit it, right-click for more, Delete removes a fixture or a load. |
| The view | The model. Click a face to select it; the part it belongs to is selected in the tree. |
| Status bar, along the bottom | What the program is doing, the time a solve has left, your licence, and Stop while a solve runs. |
When you add a fixture, a load or a material, its panel takes the place of the tree until you accept or cancel it. The model stays in view so that you can click faces while the panel is open.
Mouse
As installed:
| To | Do this |
|---|---|
| Rotate | Drag with the left button |
| Pan | Drag with the middle button, or Shift + left |
| Zoom | Turn the wheel (it zooms at the pointer), or drag with the right button |
| Roll | Ctrl + drag with the left button |
| Select a face | Click it. Ctrl-click adds a face or takes one out. |
| Open the menu for a face or part | Right-click it |
If your hands are used to another program, View › Mouse controls sets which drag rotates, pans, zooms and rolls. It has presets for the habits of SolidWorks, Fusion 360 and Inventor, Onshape and others, and can reverse the wheel.
Keys
| Key | Does |
|---|---|
| Ctrl+O | Open a model or a saved study |
| Ctrl+S | Save the study |
| Ctrl+Shift+S | Save as |
| Ctrl+N | New study |
| F5 | Solve |
| Ctrl+R | Export the report |
| F | Zoom to fit |
| Ctrl+0 / 1 / 4 / 5 | Isometric / front / right / top view |
| Enter / Esc | Accept / cancel the open panel |
| Delete | Remove the selected fixture or load |
| Ctrl+K | Claude Desktop |
Finding and hiding parts
- A part chosen in the tree is outlined in the view and drawn over the others, so you can find it behind them.
- Right-click a part for Hide, Show only this part, Material and Accuracy.
- Show all on the View tab brings hidden parts back.
- Perspective on the View tab switches between a view where far things look smaller and a flat one where parallel edges stay parallel, as on a drawing.
Units
Gusset works in millimetres, newtons and megapascals throughout: lengths in mm, forces in N, moments in N·mm, pressure and stress in MPa, mass in kg, density in kg/m³ and gravity in m/s².
Something wrong or missing on this page? Tell us.