Documentation › Working with Claude
Working with Claude
If you use Claude Desktop, you can ask it to work the open Gusset window for you in plain words.
What it does
In a Claude Desktop chat, say what you want:
- “Fix the underside of the base plate, put 5 kN down on the end of the arm, solve at draft accuracy and show the safety factor.”
- “Make every weld a 6 mm fillet stitched 50%.”
- “Is the stress at that corner a real problem? Show me where.”
Claude does it in the open window with the same actions the buttons do. It can open a model, find faces by their direction, position and holes, add fixtures and loads, set materials, welds, bolts and solution settings, solve, switch plots, point parts and faces out in the view, and export the report or the weld guide. It can also review a study and judge the results. “This face” means the faces you have picked in the view.
It cannot change the geometry. It tells you which dimension to change in CAD.
Setting it up
- Install Claude Desktop and sign in to it.
- In Gusset, choose Claude on the Study tab (Ctrl+K), then Set up Claude Desktop.
- Restart Claude Desktop.
There is no key to enter and nothing more to install. It runs on your own Claude account, and Gusset has to be open while you use it. With two Gusset windows open, the one you used last answers.
Staying in charge
- Every change Claude makes appears in the study tree, as if you had made it.
- Analysis › Undo Claude's last change takes one back. So does asking Claude to undo it.
- A change that fails changes nothing.
- Solving needs you to be signed in to Gusset, as it does from the Solve button.
Check a setup Claude made as you would check your own: which faces are held, which are loaded, and the totals. What you tell Claude goes to Anthropic under your Claude account, as in any Claude chat. Gusset itself still uploads nothing.
Something wrong or missing on this page? Tell us.